Galvanized Ground Rods

 
Hot Dip Galvanized Ground Rods
  • Outstanding corrosion resistance; high-strength steel is emersed in molten zinc forming a rustproof barrier.
  • Minimum zinc thickness 3.9 mils (99.06 microns) per ASTM A-123
  • Meets NEMA GR-1 and ANSI C135.30 requirements.
  • Stamped for inspectability and traceability.
  • Color-coded to reduce errors.
  • Listed to UL 467 specifications.
  • Made in USA.

  • Note: Rods less than 8' (96 inches) do not meet the requirements of UL, NESC nor NEC Codes.

    Note: Most competitors' galvanized grounds rods are NOT listed.




Catalog
Number

Diameter X Length
Diameter x Length (metric) Actual
Diameter
Inches
Rod Listing Matching Coupling Sub &
Master
Bundle
Wt. per
100 lb (kg)
NAED
UPC No.
632591-
Color Code
GR5005* 1/2" x 5' 12.8 mm x 1.5 m 0.484-0.500 N/A GRC-12G 10 / 100 340 (154) 070731-2 Green
GR5006 1/2" x 6' 12.8 mm x 1.8 m 0.484-0.500 N/A GRC-12G 10 / 100 410 (186) 70732-9 Green
GR5008 1/2" x 8' 12.8 mm x 2.4 0.484-0.500 N/A GRC-12G 10 / 100 550 (249) 70733-6 Green
GR6254F 5/8" x 4' 14.2 mm x 1.2 m 0.625-0.640 N/A GRC-625G 10 / 100
GR6256 5/8" x 6' 14.2 mm x 1.8 m 0.543-0.555 N/A GRC-54G 5 / 100 490 (222) 70701-5
GR6256F 5/8" x 6' 15.9 mm x 1.8 m 0.625-0.640 N/A GRC-625G 5 / 100 630 (286) 61469-6 Yellow
GR6258 5/8" x 8' 14.2 mm x 2.4 m 0.543-0.555 UL GRC-54G 5 / 100 650 (295) 70702-2 Copper
GR6258F* /8" x 8' 15.9 mm x 2.4 m 0.625-0.640 UL/CSA GRC-625G 5 / 100 850 (386) 61407-8 Yellow
GR6250 5/8" x 10' 14.2 mm x 3 m 0.543-0.555 UL GRC-54G 5 / 100 820 (372) 70703-9 Copper
GR6250F* 5/8" x 10' 15.9 mm x 3 m 0.625-0.640 UL GRC-625G 5 / 100 1060 (481) 61468-9 Yellow
GR7508 3/4"x 8' 17.3 mm x 2.4 m 0.657-0.675 UL/CSA GRC-34CP 5 / 50
GR7508F* 3/4" x 8' 19.05 mm x 2.4 m 0.750-0.769 UL GRC-34G 5 / 50 1250 (567) 61478-8 Black
GR7510 3/4"x 10' 17.3 mm x 3 m 0.657-0.675 UL/CSA GRC-34CP 5 / 50
GR7510F 3/4" x 10' 19.05 mm x 3 m 0.750-0.769 UL/CSA GRC-34G 5 / 50 1530 (698) 61479-5 Black
GR1010F 1" x 10' 25.4 mm x 3 m 1.000-1.140 UL/CSA GRC-100G 5 / 25 2700 (1225) 61484-9

Notes: * RUS Listed

 
Pig-Tail Rods
  • Made in USA.



Contact factory for quotation of copper-coated and hot-dip galvanized pig-tail rods.
Provide rod type, size, wire type, gage and length. An example: 5/8" x 8' copper coated rod
with 4' of #6 bare solid copper pig tail to be attached 6" from top or drive end of the rod.