Compression Tools

 
CMCT-12 Hand Operated Compression Tool


 
  • Lightweight and portable.
  • Two speed pumping system for rapid ram advance.
  • High strength fiberglass handles with a C-shaped head with 180° rotation for ease of accessibility.
  • 12 ton capacity.
  • Twist handle release and a high pressure safety relief valve.
  • Push button system for ease of die insertion and removal.
  • Optional covered C-head for mechanical protection and optional tool bag or carrying case.
  • Can be used with either Burndy or T&B “U” or shell-type dies.
  • Two-year warranty.

Safety Notice
All rubber or PVC covered tools have been designed to provide protection against accidental brush contact with energized lines. However, it is the user’s responsibility to adhere to all safety procedure and regulations as specified by OSHA, other regulatory bodies and employer safety practices and procedures. GALVAN Electrical, Inc. is not responsible for injuries that can occur to users of this equipment.
Crimping Capacity
COPPER -No. 8 stranded through 500 MCM grounding terminals and splices.
  -No. 8 stranded through 250 MCM grounding taps and 3/4” ground rod.
  -No. 8 stranded through 500 MCM insulated and uninsulated terminals.
Aluminum -No. 8 stranded through 750 MCM terminals and splices.
ASCR -No. 6 stranded through 556.6 26/7 stranding.

Catalog
Number
Crimping
Force
Operating
Pressure
Jaw
Opening
Dimensions Head
Width
Tool
Weight
NAED
UPC
No.632591-
Length Depth
CMCT-12 13.1 US tons
11.9 Metric tons
10,000 PSI
70,000 kPA
.950 in
6.98 cm
23.25
59.05cm
2.75 in
6.98cm
4.75 in
12.07cm
13.60 lbs.
6.16 kg.
71191-3

CMIT Mechanical Indent Tool


 
  • High strength, lightweight aluminum body.
  • No dies required.
  • High strength fiberglass handles.
  • Designed to easily crimp a range of connectors without the use of hydraulic tools.
  • Adjustable indentor to cover a wide array of wire ranges and wire types of copper and aluminum lugs and splices.
  • Indentor adjusting screw is protected to prevent damage from accidental dropping.
  • Calibrated scale for copper connectors with wire range sizes.
  • Nest and indentor made of high strength steel for durability.
  • Optional tool bag.
  • One-year warranty.

Catalog
Number
Crimping
Capacity
Dimensions ToolWeight NAED
UPC
No.632591-
Length Depth Width
CMIT 4/0 AWG, 107.07mm
Aluminum Cable
250 MCM, 126.5mm
Copper Cable
23.63 in.
60.00cm
1.15 in.
3.81cm
4.50 in
11.43cm
5.50 lbs.
2.50 kg
71192-0

 
Economical Mechanical Indent Tool


 
  • High strength, steel body.
  • No dies required.
  • Designed to easily crimp a range of fittings without the use of hydraulic tools.
  • Adjustable indentor to cover a wide array of wire ranges and wire types of copper and aluminum lugs and splices.
  • Calibrated scale for aluminum connectors with wire range from 250 MCM down to #8 str.
  • Calibrated scale for copper connectors with wire range from 4/0 AWG down to #8 str.
  • Nest and indentor made of high strength steel for durability.
  • One-year warranty.

Catalog
Number
Crimping
Capacity
Dimensions Tool
Weight
NAED
UPC
No.632591-
Length Depth Width
CCIT 4/0 AWG, 107.07mm
Aluminum Cable
250 MCM, 126.5 mm
Copper Cable
23.00 in.
60.00cm
1.15 in.
3.81cm
4.50 in.
11.43cm.
6.05 lbs.
2.75kg.
71095-4