Bonding and Grounding Connectors

 
Type APC Dual-Rated Extruded Aluminum Parallel Groove Connectors
Catalog
Number
Conductor Range Pcs.
per Ctn.
Wt.
per 100
Dimensions NAED
UPC
No. 632591-
Main Tap A B C
APC-2/0 2/0-6 2/0-2 50 20.3 1.37" 1.61" 2" 70911-8
APC-4/0 4/0-2 4/0-2 25 26.3 1.37" 2" 2" 70912-5

  • Extruded Type PAA One- And Two-Bolt Aluminums for use on aluminum to aluminum or aluminum to copper connectors with Oxide Inhibitor.
  • Tin plating (-P) or wax dip (-6) must be specified for non-Oxide Inhibitor filled connectors.
  • Standard clamp is supplied with contacts and galvanized steel hardware.
  • All connectors can be installed with live line tools.
Bonding and Grounding Connectors
  • Designed for easy installation, high conductivity and long life.
  • Install with wrench (hex head) or pliers (square).

Catalog
Number
Galv
Steel
Strand
Copper
Tap
Pcs.
per Ctn.
Wt.
per 100
NAED
UPC
No.632591-
Finish
Description
K1** 1/4"-7/16" #8 sol. - 2/0 100 16 70746-6 Fully Plated/Tap-Grooved
K2 1/4"-7/16" #8 sol. - 2/0 100 16 70747-3 Fully Plated
K3 1/4"-7/16" #8 sol. - 2/0 100 16 70748-0 Not Plated
KUL* 1/4"-7/16" #8 sol. - 2/0 100 16 70749-7 Fully Plated

*Denotes UL Listed, ** RUS Listed
 
Type TGC Beam Grounding Clamp



Catalog
Number
Description Conductor
Range
Pcs.
per Ctn
Wt.
per 100
NAED
UPC
No. 6323591-
TGC Square Head
Steel Bolt
#6 - #14
solid
100 35 613903
TGC-H Hex Head
Steel Bolt
#6-#14
solid
25 9 613910

  • Designed for grounding CATV and telecommunication installations.
  • Connects solid copper conductors (#6 - #14) to permanently grounded metal frames.
  • Square or hex-head bolt
  • Ground wire access from four directions
  • High-strength copper alloy body
  • High-strength anchoring bolt
  • UL 467 Listed
 
Figure 8 Cable Connector

Catalog
Number
Conductor
Range
Pcs.
per Ctn.
Wt.
per 100
NAED
UPC
No.632591-
CC167P .146-.312 cable to
.146-.312 tap
50 23 70753-4

Notes:
Teeth puncture insulation during tightening for a positive ground without skinning conductor.
Kenny Clamp UL-Listed Connector Galvan Kenny Clamps are your best choice to ensure that grounding electrode conductor installations are code compliant. The Kenny Clamp is UL-Listed for the bonding and grounding of electrode connectors in panel boards, pad mounts, dry-type transformers, metallic raceways and enclosures. Simply install Galvan’s Kenny Clamp through a 1/2-inch knockout with paint removed, tighten the steel locknut, insert the grounding electrode through the clamp and tighten the compression nut. Your installation is now NEC Code compliant. The Kenny Clamp saves time and money compared to current non-compliant alternatives.

CatalogNumber ConductorRange Pcs. per Ctn. Wt.
per 100
NAED
UPC
No. 632591-
KCCA-8 sol #8 solid 10 125 613927
KCCA-8 str #8 stranded 10 125 613934
KCCA-6 sol #6 solid 10 125 613941
KCCA-6 str #6 stranded 10 125 613958
KCCA-4 sol #4 solid 10 125 613965
KCCA-4 str #4 stranded 10 125 613972
KCCA-2 str #2 stranded 10 125 613989
KCCA-1/0 1/0 10 125 613996
KCCA-2/0 2/0 10 125 614009
KCCA-3/0 3/0 10 125 614016

    Kenny Clamp
  • Eliminates potential for a choke at the hole
  • Meets UL 467 for bonding/grounding
  • Meets UL 486A for connectors
  • Complies with NEC 110.3(B) and 250.8 (using listed grounding or bonding connector for proper application)
  • Complies with NEC 250.64(E) (entering and exiting metallic raceways and enclosures)